Electronic-Controlled Transmissions – How they Work...
The operating principles of automatic transmissions have remained essentially unchanged for decades (with the exception of CVTs).There are two main sections of an automatic transmission – the hydraulically-controlled planetary gear unit and torque converter.
The automatic transmission is mated to the engine using a fluid coupling known as a torque converter. The engine drives an impeller to produce energy in the hydraulic fluid while a turbine (connected to the transmission) converts this hydraulic energy into mechanical force. When required, the torque converter also allows a considerable amount of slip between the engine and transmission. This allows the car to come to a stop without stalling and multiplies applied torque when accelerating (because the engine can turn faster than the transmission). The amount of torque converter slip varies at different rpm and, unless there’s a lock-up mechanism, there will always be some degree of slip.
Powertrain Control Solutions Universal Transmission Controller
The US-built PCS Controller is programmed using a Windows interface with the availability of up to 16 digital inputs, six analogue inputs, two temperature inputs and four speed inputs. In most instances, the controller is programmed on the relationship between road speed, engine load, engine rpm and throttle position.
The PCS Transmission Controller offers programmable shift points, selectable shift modes (power, towing and economy), six pulse-width modulated outputs, six digital driver outputs (ideal for engaging a lock-up torque converter), four frequency outputs (including one for speedometer drive) and a data logging capability. It can also be configured to work with separately available paddle-style shifters.
Cost is around US$700 plus the necessary wiring harness (which typically cost US$150).
See http://www.powertraincontrolsolutions.com or www.transmissioncontroller.com for more.
Baumannator TCS
The Baumannator TCS electronic trans control is designed for use with the Ford AOD-E/4R70W and E4OD transmission (as used in post ’98 light trucks and Mustangs up to mid ‘90s). It is hoped that more transmissions will be supported in the future.The micro-processor based controller is tuned via Windows-based software to control shift pattern on the basis of road speed, throttle position and other inputs. The line pressure curve (versus load) can also be tuned to improve the torque capacity of the transmission and part-throttle shift firmness. Torque converter clutch operation is also adjustable on the basis of throttle angle and road speed.
Two different sets of calibration data can be stored into the Baumannator to give on-the-fly adjustment and there’s the option of sequential-style gear operation using OE cruise control switches.
The system retails for US$425 or US$550 including harness.
See http://www.becontrols.com/ for details.
Compushift
Compushift is another US-based product that’s designed to control popular Ford and GM transmissions. We believe that they support the GM 4L60/65 transmissions used in various Holden vehicles. The Compushift is supplied with a harness and throttle position sensor to enable transmission installation into any vehicle.The Compushift controls six shift solenoids and torque converter lock-up is user-adjustable based on road speed, rpm or gear. A backlit LCD display unit/programmer is also available as an option – this shows transmission temperature, hydraulic pressure, gear position, torque converter lock-up and throttle position. It also functions as tachometer, speedo, stopwatch and rolling dynamometer.
The components are contained in a powder-coated aluminium box with mounting flanges and features automatic protection against failed solenoids and over-temperature.
Cost is US$1185.
See http://www.compushift.com/compushift.htm
TCI Automotive TCU
Here’s another US-based stand-alone trans controller. At this stage, the TCU supports GM 4L60E and 4L80E transmissions with the Ford products yet to come.The TCU incorporates a waterproof case, complete wiring harness, T-Com WP software, instructions and a laptop connection cable. Adapters are available for fitment to carby engines.
Prices range up to around US$900 - visit http://www.tciauto.com/tci.htm for details.
Stick around for Part Two (the final) of this series – there are a bunch of other aftermarket controllers to check out!